'accelerometer motion sensors'

Neurotronic KAFO  The Neurotronic knee joint system is a sophisticated electro mechanical knee control component designed specifically for people with knee extensor weakness, knee instability or loss of knee control and sets the benchmark for this class of limb control technology.  The Neurotronic is incorporated into a discreet lightweight carbon frame, locking automatically in stance phase and free moving in swing phase. In stance phase, the Neurotronic stabilises the knee in any position to enable the user to safely load the effected limb even when the knee joint is flexed or bent. During swing phase, the Neurotronic allows the knee to move freely to achieve a natural gait pattern without the compensations seen with conventional designs.  The electromechanical knee joint system is controlled either by a pressure sensor under the foot piece or by motion sensors integrated in the controller. The control mechanism incorporates an inclinometer and accelerometer motion sensors that detect the movement and position of the lower leg.  When standing with the orthosis or just before heel strike, the motion sensors lock the Neurotronic system knee joint. The motion detection is sensitive to speed and the joint will lock regardless of length and speed of steps and regardless of a hill gradient.

Limited motion AFO  Ankle equinus is a condition in which the upward bending motion (dorsiflexion) of the ankle joint is limited. Those with ankle equines have a restriction in flexibility in bringing the top of the foot toward the front of the leg. Equinus can occur in one or both feet.  It is use for Medio lateral instability  Use in foot drop  Hemiplegic and para plegic  Fracture

A pneumatic knee joint is a type of artificial knee joint that uses compressed air to assist with movement and support. it use in above knee prosthesis . feature :- Dynamic Movement: Pneumatic systems allow for smooth and adaptive movements, mimicking natural knee motion. A typical pneumatic cylinder consists of a cylinder barrel, a piston, seals, and end caps. It may also include ports for air input and output. Compressed air is introduced into the cylinder through an inlet port. This air is typically generated by an air compressor. As the compressed air enters the cylinder, it pushes against the piston. This pressure causes the piston to move in one direction (extend or retract) depending on the configuration of the cylinder. When the piston reaches the end of its stroke, the air can be vented out through an exhaust port, allowing the piston to return to its original position. This can happen either automatically or through a control system. The motion can be controlled using valves that regulate the flow of air into and out of the cylinder, allowing for precise control of the piston’s movement. Lightweight Design: Pneumatic components can be lighter than traditional mechanical parts, improving comfort for the user. Shock Absorption: The system can absorb impact, reducing stress on other joints and enhancing overall mobility.

A double-action ankle joint ankle-foot orthosis (AFO) is a type of orthotic device designed to support and stabilize the ankle and foot. It features two separate joints, one for dorsiflexion (lifting the foot up) and one for plantarflexion (pointing the foot down). This dual-joint mechanism allows for more natural and controlled movement of the ankle, helping to address various conditions affecting gait and stability. Here are some key points about a double-action AFO: Functionality: The double-action joints provide the ability to control both upward and downward motion of the foot. This helps in managing conditions like foot drop, where the foot cannot be lifted properly, or other gait abnormalities. Customization: These AFOs are often custom-made to fit the individual\'s specific anatomy and needs. Adjustments can be made to fine-tune the range of motion and alignment. Materials: They are typically made from lightweight and durable materials such as thermoplastics or carbon fiber, which offer a balance of strength and flexibility. Indications: They are used for conditions like cerebral palsy, stroke, peripheral neuropathy, or other neurological or musculoskeletal disorders that affect ankle and foot function. Design: The double-action mechanism allows for controlled movement and can help in improving gait, stability, and overall mobility.

If you choose to receive an osseointegrated prosthetic nose, your surgeon will place several titanium implant posts into the bone around the nose. The silicone nose will then snap securely onto these implants. Both types of prostheses are removable. You should take off your prosthetic nose before you sleep or participate in athletic activities, and you should also remove it once a day to thoroughly clean the nose and underlying tissue. Typically, these prostheses last between one and three years, depending on maintenance, environment, activity level, and other factors. Nose Prosthetic manufacturer in Pune, Surat, Kolkata, India

A Knee-Ankle-Foot Orthosis (KAFO) is a custom made brace that starts above the knee and extends all the way down the leg to the end of the toes. These braces will normally include a knee joint and possibly an ankle joint as well. A KAFO is prescribed by your physician when there is significant weakness and/or instability at the knee and ankle joints. The KAFO will allow patients to stand by locking the knee joint in the brace when the thigh muscles are too weak to support the knee. This brace can also reduce significant knee hyperextension (genu recurvatum) during the gait cycle. KAFOs can be extended to the hip to provide additional support to the hip joint if necessary.  The KAFO is commonly used in the treatment of: 1-Blount’s Disease 2-Genu Recurvatum 3-Post-Polio 4-Spinal Cord Injury 5-Arthrogryposis 6-Cerebral Palsy 7-Polio 8-Spina Bifida  At your initial assessment you will meet with your Orthotist to go through a complete assessment of your strength and range of motion and undergo an observational gait analysis. There are many different designs of KAFOs, each with different functions and levels of support. In collaboration with your Orthotist at OrthoProActive and your health team, we will determine which KAFO design will help to provide you with the best functional outcomes.

KAFO with drop lock Imported quality:  The term KAFO is an acronym that stands for Knee-Ankle-Foot Orthosis and describes the part of the body that this device encompasses. This device extends from the thigh to the foot and is generally used to control instabilities in the lower limb by maintaining alignment and controlling motion. Instabilities can be either due to skeletal problems: broken bones, arthritic joints, bowleg, knock-knee, knee hyperextension or muscular weakness and paralysis. With this in mind, the indications for the use of a KAFO are many and varied and any one particular design is specific to the needs of the person it is made for.  It is very light weight and more durable.

KAFO with drop lock Indian Made  A KAFO is a device that is used to control instabilities in the knee and lower limb by maintaining proper alignment and controlling motion. Instabilities can be caused by broken bones, arthritic joints, hyperextension of the knee, muscle weakness and/or paralysis. As there are many different reasons that a person may need to utilize a KAFO, there are many different designs for a KAFO based on necessity.  It is made up of Indian Made drop Lock knee Joint  We manufacture the Orhtosis by POP casting, that’s why it give proper fitment.

Active KAFO  The Active plus-Knee comes furnished with a pneumatic spring on the lateral side of the joint to assist with knee extension during the swing phase of gait.  A medial knee joint is also included to help control knee alignment and give Medio lateral stability.  The active plus -Knee is a free motion knee joint that is designed to provide extension assist, not prevent knee flexion. Available with your choice of a 75N, 125N (for standard applications), or 175N pneumatic spring.